best antiscalant chemical 2021-vcycletech

1.What is Antiscalant

Antiscalant is a pretreatment water additive for a reverse osmosis system, which can effectively prevent membrane scaling. How to use: Inject scale inhibitor into the water before the feedwater enters the reverse osmosis membrane and sends it into the system.

 

2. How to use ro antiscalant.

 

ro antiscalant is used to prevent scaling and contamination of reverse osmosis membranes. The scale may include mineral fouling, such as calcium sulfate, calcium carbonate, barium sulfate, silica, calcium fluoride, and strontium sulfate. Scale inhibitors should be added to break down sulfate precipitation, calcium carbonate, and other mineral fouling before it reaches the reverse osmosis membrane.

ro antiscalant is used to deal with the low feed rates of reverse osmosis systems and has a high payback rate. When used properly, antiscalant chemicals can extend the interval between membrane cleanings from weeks to years. Without Antiscalant, reverse osmosis membrane systems would not serve the water treatment industry as efficiently as possible.

 

3. Product specifications.

1	Appearance : Clear colourless to pale yellow liquid
2	pH as supplied : 10.0 – 11.5
3	Specific gravity : 1.30 – 1.40
4	Solubility in water : Miscible in all ratios
5	Flash point : Non-flammable aqueous solution

4、Application method.

ro antiscalant should be injected into the membrane system or diluted after treatment with chlorine and sodium metabisulfite. The reverse osmosis solution or equivalent quality of water should be used for dilution, and the solution should be less than 10%. The solution should be kept sealed and used up within 4-5 days, as ro antiscalant is not compatible with cationic polymers remaining after pretreatment.

 

Each reverse osmosis system requires dosage testing to determine the proper dosage, which requires complete water quality analysis skills. Based on this, our sales representatives can recommend accurate dosing predictions.

 

5、Caution.

 

ro antiscalant is not hazardous in the broadest sense, but as with all industrial chemicals, there are several requirements to be observed when handling and using: Close the container when not in use. Do not swallow the product. Avoid prolonged contact with skin; wear goggles, face shield, and rubber gloves when handling this product.

 

6、Storage, packaging, and shelf life.

antiscalant liquid, polyphosphate scale

the inhibitor is available in 30 kg drums, 50/200 kg drums, and 1300 kg IBC containers. ro antiscalant has a shelf life of two years under normal handling and storage conditions. It is recommended to keep the containers closed and in a cool place.

 

7、Best ro antiscalant supplier and exporter in China.

Antiscalant is mainly used to prevent scaling and fouling of RO or reverse osmosis membranes and is particularly suitable for the disposal of mineral fouling, such as calcium fluoride, calcium sulfate, barium sulfate, strontium sulfate, calcium carbonate, and silica. Antiscalant chemicals should be added to break all mineral fouling before the water passes through the reverse osmosis membrane. As one of the most famous exporters and suppliers of anti-salt chemicals in China, we will provide the right products for all customers within a reasonable price range.

 

8、How good is our antiscalant chemical?

Our antiscalant chemical will be used as a pretreatment water additive for reverse osmosis systems to prevent membrane contamination. The chemicals are first injected into the water and then travel through the system to each layer. The chemicals then delay the formation of bicarbonate from calcium and magnesium. With this delay, Antiscalant will carefully allow the water to pass through the membrane without any negative chemical reactions.

 

9、How does antiscalant chemical work?

The scale that forms in reverse osmosis membranes is inorganic because it contains calcium, magnesium, silicon, strontium, fluorine, barium, and iron. These chemicals reduce RO's efficiency, making it impossible to produce safe water and meet all drinking water needs. Our ro antiscalant use can reduce the tendency of fouling by 80%, and there are three different ways to perform this action. In the first step, it will maintain a supersaturated solution of soluble salts. Secondly, it will distort the crystal shape, thus forming soft and non-sticky scales. Finally, due to its dispersing ability, the ro antiscalant will be absorbed by the crystals and release a considerable ionic scale.

 

10、How are our ro antiscalant chemicals produced?

Our ro antiscalant chemicals are made in a general liquid for use in reverse osmosis systems. We produce antiscale chemicals with bright colors, tight molecular structures, and a wide range of molecular weights. With our antiscalants' help, it is possible to control sulfate and carbonate contamination of barium, calcium, strontium, and magnesium. Also, the compounds can control colloidal and iron deposits.

 

11、Why choose our products and services?

Currently, vcycletech is one of the renowned suppliers of water treatment chemicals in China, offering the best quality products with high-quality raw materials. We are responsible for providing export and supply services of anti-scaling chemicals and reverse osmosis chemicals. Our products are manufactured by our advanced manufacturing department and are recognized by our clients for their practicality.

 

As one of the best suppliers and exporters of anti-scaling chemicals in China, we ensure our products' delivery within the stipulated time frame. All our products are carefully checked before they are put on the market. Please buy with confidence! If you need to get a detailed quotation and free samples, please contact us. Thank you very much!